HACMP 5.x 完全手册,第 2 部分:配置
2008-11-13 10:57:40 来源:WEB开发网同样修改 host2_l1_boot1
这样可以看到 net_ether_03 没有了。
添加心跳网络
smitty hacmp ->Extended Configuration->Extended Topology Configuration->Configure HACMP Communication Interfaces/Devices->Add Communication Interfaces/Devices ->Add Discovered Communication Interface and Devices->Communication Devices
串口心跳
# Node Device Device Path
host1 tty0 /dev/tty0
host2 tty0 /dev/tty0
另:磁盘心跳参考
# Node Device Device Path Pvid
host1 hdisk5 /dev/hdisk5 00c1eedfbf8 x
host2 hdisk5 /dev/hdisk5 00c1eedfbf8 x
按 F7 逐一选中回车,将增加心跳网络,至此 HACMP 的拓扑结构已配好
看确认拓扑 (toplog) 结构
smitty hacmp->Extended Configuration ->Extended Topology Configuration ->Show HACMP Topology ->Show Cluster TopologyCluster Name: test_cluster
Cluster Connection Authentication Mode: Standard
Cluster Message Authentication Mode: None
Cluster Message Encryption: None
Use Persistent Labels for Communication: No
NODE host1:
Network net_rs232_01
host1_tty0_01 /dev/tty0
Network net_ether_01
host1_l1_boot1 10.2.1.1
host1_l1_boot2 10.2.11.1
Network net_ether_02
host1_l2_boot1 10.2.2.1
host1_l2_boot2 10.2.12.1
NODE host2:
Network net_rs232_01
host2_tty0_01 /dev/tty0
Network net_ether_01
host2_l1_boot1 10.2.1.1
host2_l1_boot2 10.2.11.1
Network net_ether_02
host2_l2_boot1 10.2.2.1
host2_l2_boot2 10.2.12.1
更多精彩
赞助商链接