Redhat9＋ADSL＋IPTABLES＋DHCPD解决方案

好服务器的网卡基本配置完成，现在我们来配置adsl连接，网上有很多人说redhat的自adsl有问题，可我配置却没有任何问题。我是直接用命令adsl-setup来配置

输入：adsl-setup 进入配置对话

welcome to the adsl client setup. first, i will run some checks on

your system to make sure the pppoe client is installed properly...

the following dsl config was found on your system:

device: name:

ppp0 dslppp0

please enter the device if you want to configure the present dsl config

(default ppp0) or enter 'n' if you want to create a new one: 建立的拨号连接名字,默认就行

login name

enter your login name (default ): 输入adsl账号的登陆用户名

interface

enter the ethernet interface connected to the adsl modem

for solaris, this is likely to be something like /dev/hme0.

for linux, it will be ethx, where 'x' is a number.

(default eth1): adsl设备所绑定的网卡,我们这里是eht1

do you want the link to come up on demand, or stay up continuously?

if you want it to come up on demand, enter the idle time in seconds

after which the link should be dropped. if you want the link to

stay up permanently, enter 'no' (two letters, lower-case.)

note: demand-activated links do not interact well with dynamic ip

addresses. you may have some problems with demand-activated links.

编缉推荐阅读以下文章

• 暂无相关文章