HACMP 5.x 完全手册，第 2 部分：配置

核心提示： 同样修改 host2_l1_boot1这样可以看到 net_ether_03 没有了，添加心跳网络 smitty hacmp ->Extended Configuration->Extended Topology Configuration->Configure HACM

同样修改 host2_l1_boot1

这样可以看到 net_ether_03 没有了。

添加心跳网络

smitty hacmp ->Extended Configuration->Extended Topology Configuration->Configure HACMP Communication Interfaces/Devices->Add Communication Interfaces/Devices ->Add Discovered Communication Interface and Devices->Communication Devices

串口心跳

# Node Device Device Path
host1 tty0 /dev/tty0
host2 tty0 /dev/tty0

另：磁盘心跳参考

# Node Device Device Path Pvid
host1 hdisk5 /dev/hdisk5 00c1eedfbf8 x
host2 hdisk5 /dev/hdisk5 00c1eedfbf8 x

按 F7 逐一选中回车，将增加心跳网络，至此 HACMP 的拓扑结构已配好

看确认拓扑 (toplog) 结构

smitty hacmp->Extended Configuration ->Extended Topology Configuration ->Show HACMP Topology ->Show Cluster TopologyCluster Name: test_cluster
Cluster Connection Authentication Mode: Standard
Cluster Message Authentication Mode: None
Cluster Message Encryption: None
Use Persistent Labels for Communication: No
NODE host1:
Network net_rs232_01
host1_tty0_01 /dev/tty0
Network net_ether_01
host1_l1_boot1 10.2.1.1
host1_l1_boot2 10.2.11.1
Network net_ether_02
host1_l2_boot1 10.2.2.1
host1_l2_boot2 10.2.12.1
NODE host2:
Network net_rs232_01
host2_tty0_01 /dev/tty0
Network net_ether_01
host2_l1_boot1 10.2.1.1
host2_l1_boot2 10.2.11.1
Network net_ether_02
host2_l2_boot1 10.2.2.1
host2_l2_boot2 10.2.12.1